代码编织梦想

Centos7更换yum镜像源

1、首先备份/etc/yum.repos.d/CentOS-Base.repo

mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.backup

2、下载对应版本repo文件, 放入/etc/yum.repos.d/(操作前请做好相应备份)
以CentOS7-Base-163.repo为例

# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client.  You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the 
# remarked out baseurl= line instead.
#
#
[base]
name=CentOS-$releasever - Base - 163.com
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os
baseurl=http://mirrors.163.com/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=http://mirrors.163.com/centos/RPM-GPG-KEY-CentOS-7

#released updates
[updates]
name=CentOS-$releasever - Updates - 163.com
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates
baseurl=http://mirrors.163.com/centos/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=http://mirrors.163.com/centos/RPM-GPG-KEY-CentOS-7

#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras - 163.com
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras
baseurl=http://mirrors.163.com/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=http://mirrors.163.com/centos/RPM-GPG-KEY-CentOS-7

#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus - 163.com
baseurl=http://mirrors.163.com/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=0
gpgkey=http://mirrors.163.com/centos/RPM-GPG-KEY-CentOS-7

注意文件中$releasever有可能对应不上要手动写死
3、运行以下命令生成缓存

yum clean all
yum makecache

4、yum代理
在/etc/yum.conf中加入下面几句.

vim /etc/yum.conf
proxy=http://210.45.72.XX:808
proxy_username=username
proxy_password=password
版权声明:本文为博主原创文章,遵循 CC 4.0 BY-SA 版权协议,转载请附上原文出处链接和本声明。
本文链接:https://blog.csdn.net/weixin_38168694/article/details/117530250

使用yum安装时failure: repodata/repomd.xml from local: [errno 256] no more mirrors to try._take it down的博客-爱代码爱编程

出现这种问题大多数是yum仓库没有配置好的问题。 一、首先,先检查能不能上网 ping www.baidu.com 如果没有回应的话,就是网卡配置或者仓库配置的问题的问题。如果有回应那就是仓库配置的问题。 1、有回

centos7 重装yum并且配置163国内镜像源_weixin_33712881的博客-爱代码爱编程

简介: 自己的阿里云服务器yum突然用不起了,下载不了任何东西 这时就想到最暴力的方式重装yum 所有操作均在ROOT用户下,系统版本是CentOS7 X86_64: 一、删除原有YUM # rpm -aq|grep yum|xargs rpm -e --nodeps 复制代码 二、下载yum,注意自己的LINUX系统版本,

linux yum源设置(centos6)-爱代码爱编程

一、采用163版本的repo制作yum源 1.下载对应版本repo文件, 放入/etc/yum.repos.d/(操作前请做好相应备份) mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.backup [root@sht-sgmhado

CentOS7使用yum时遇见failure: repodata/repomd.xml from base: [Errno 256]错误-爱代码爱编程

我yum安装东西的时候遇见这个问题: failure: repodata/repomd.xml from base: [Errno 256] No more mirrors to try. ftp://mirrors.163.com/centos/7/os/x86_64/repodata/repomd.xml: [Errno -36] Error impo

Centos7系统安装yum遇到的问题failure: repodata/repomd.xml from base: [Errno 256] No more mirrors to try。-爱代码爱编程

起初我linux上Centos7在yum上下载nginx出现这个提示,后来看了很多博客说是执行下面三个语句就能解决,但是我的还是不行! [root@localhost ~]# yum clean all [root@localhost ~]# yum clean metadata [root@localhost ~]# yum update

[Linux] CentOS 7.7 failure: repodata/repomd.xml from centos7: [Errno 256] No more mirrors to try.-爱代码爱编程

场景 修改了本地yum源,yum clean all 后尝试yum update 或者yum makecache 报错,内容为: failure: repodata/repomd.xml from centos7: [Errno 256] No more mirrors to try. 解决: 备份/etc/yum.repos.d 下所有的镜像,新建

安装docker出现failure: repodata/repomd.xml from docker-ce-stable: [Errno 256] No more mirrors to try.-爱代码爱编程

安装docker出现failure: repodata/repomd.xml from docker-ce-stable: [Errno 256] No more mirrors to try. 可能会出现以下两种情况 1.网络的问题,需要修改文件,使用命令 vi /etc/sysconfig/network-scripts/ifcfg-ens33 2.需

linux 添加163源,CentOS yum 源设置为163的源操作步骤及配置文件参考-爱代码爱编程

CentOS下可以通过yum很方便快捷的安装所需的软件和库,如果yum的源不好,安装速度会非常慢,CentOS默认官方源似乎都是国外的,所以速度无法保证,我一直使用163的源,感觉速度不错。下面就说说如何修改yum的源。 1、进入存放源配置的文件夹 cd /etc/yum.repos.d 2、备份默认源 mv ./CentOS-Base.rep